Home
Class 12
PHYSICS
A very light rod of length l pivoted at ...

A very light rod of length `l` pivoted at `O` is connected with two springs of stiffness `k_1` & `k_2` at a distance of a & l from the pivot respectively. A block of mass ma attached with the spring `k_(2)` is kept on a smooth horizontal surface. Find the angular frequency of small oscillation of the block `m`.

Text Solution

Verified by Experts

Let the block be pulled towards right through a distance x, then `x = x_(B) + x_(CB)"….."(i)`
where, `x_(CH) = ` displacement of C (the block) relative to B
Thus, `x_(CB) = (F)/(k_(2)) "…."(ii)` and `x_(B) = ((F')/(k_(1)))(l)/(a)`
Torque acting on the rod about point O.
`tau_(0) = F'a - Fl rArr I_(0) (d^(2)theta)/(dt^(2)) = F'a - Fl`
Since the rod is very light its moment of inertia
`I_(0)` about O is approximentely equal to zero `rArr F' = F(l/a)"....."(iv)`
Using (iii) and (iv) `rArr x_(B) = (F)/(k_(1)) (l/a)^(2)"............."`
Using (i), (ii) & (v) `rArr x = (F)/(k_(1)) (l/a)^(2) + (F)/(k_(2))`
As force F is opposite to displacement x, then
`rArr F=-(k_(1)k_(2))/(k_(2)(l/a)^(2)+k_(1))xrArr momega^(2)x=(k_(1)k_(2))/(k_(2)(l/a)^(2)+k_(1))xrArr omega = sqrt((k_(1)k_(2)a^(2))/(m(k_(1)a^(2)+k_(2)l^(2))))`
Promotional Banner

Topper's Solved these Questions

  • SIMPLE HARMONIC MOTION

    ALLEN |Exercise SOME WORKED OUT EXAMPLES|29 Videos
  • SIMPLE HARMONIC MOTION

    ALLEN |Exercise Exercise-01|117 Videos
  • RACE

    ALLEN |Exercise Basic Maths (Wave Motion & Dopplers Effect) (Stationary waves & doppler effect, beats)|25 Videos
  • TEST PAPER

    ALLEN |Exercise PHYSICS|4 Videos

Similar Questions

Explore conceptually related problems

Two springs are connected to a block of mass M is placed on a frictionless surface as shown in figure. If both springs have a spring constant k, the frequency of oscillation of the block is………

Two springs of force constants k_(1) and k_(2) , are connected to a mass m as shown. The frequency of oscillation of the mass is f . If both k_(1) and k_(2) are made four times their original values, the frequency of oscillation becomes

An almost inertia-less rod of length l3.5 m can rotate freely around a horizontal axis passing through its top end. At the bottom end of the roa a small ball of mass m andat the mid-point another small ball of mass 3m is attached. Find the angular frequency (in SI units) of small oscillations of the system about the equilibrium position. Gravitational acceleration is g=9.8 m//s^(2).

Two spring of force constants k and 2k are connected to a mass as shown in figure. The frequency of oscillation of the mass is……..

When a mass m is connected individually to two springs S_(1)" and "S_(2) the oscillation frequencies are v_(1)" and "v_(2) . If the same mass is attached to the two springs as shown in figure, the oscillation frequency would be

A rod of mass M and length K is hinged at its one end n carris a block f mass m at its other end. A spring of force constant k_(1) is installed at distance a form the hinge and another of force constant k_(2) at a distance b as shown in the figure. If the whole arrangement rests on a smoth horizontal table top. Find the frequency of vibrations.

The block of mass M moving on the frictionless horizontal surface collides with the spring constant k and compresses it by length L . The maximum momention of the block after collision is

A uniform rod of length (L) and mass (M) is pivoted at the centre. Its two ends are attached to two springs of equal spring constants (k). The springs are fixed to rigid supports as shown in the figure, and the rod is free to oscillate in the horizontal plane. The rod is free to oscillate in the horizontal plane. The rod is gently pushed through a small angle (theta) in one direction and released. The frequency of oscillation is. ? (##JMA_CHMO_C10_009_Q01##).

Spring of spring constant 1200 Nm^(-1) is mounted on a smooth fricationless surface and attached to a block of mass 3 kg . Block is pulled 2 cm to the right and released. The angular frequency of oscillation is

Four blocks of the same mass m connected by cords are pulled by a force F on a smooth horizontal surface as shown in Determine the tensions T_1 ,T_2 and T_3 in the cords.