Home
Class 12
PHYSICS
Let a steel bar of length 'l', breadth '...

Let a steel bar of length `'l',` breadth 'b' and depth 'd' be loaded at the centre by a load 'W'. Then the sag of bending of beam is (Y=Young's modulus of material of steel)

A

`(Wl^(3))/(2bd^(3)Y)`

B

`(Wl^(3))/(4bd^(3)Y)`

C

`(Wl^(3))/(2bd^(3)Y)`

D

`(Wl^(3))/(4bd^(2)Y)`

Text Solution

Verified by Experts

The correct Answer is:
B
Sag of bonding of beam `=(Wl^(3))/(4bd^(3)y)`
Promotional Banner

Topper's Solved these Questions

  • MHT-CET 2016

    NIKITA PUBLICATION|Exercise SUREACT TENSION|2 Videos

  • MHT-CET 2016

    NIKITA PUBLICATION|Exercise WAVE MOTION|1 Videos

  • MHT-CET 2016

    NIKITA PUBLICATION|Exercise OSCILLATIONS|5 Videos

  • MH-CET - 2017

    NIKITA PUBLICATION|Exercise CUMMUNICATION SYSTEMS|1 Videos

  • OSCILLATIONS

    NIKITA PUBLICATION|Exercise MCQ|493 Videos

Similar Questions

Explore conceptually related problems

Let a steel bar of length l, breadth b and depth d be laoded at the centre by a load W. Then the sag of bending of beam is (Y = young's modulus of material of steel)

By the method of dimensions, test the accuracy of the equation : delta = (mgl^3)/(4bd^3Y) where delta is depression in the middle of a bar of length I, breadth b, depth d, when it is loaded in the middle with mass m. Y is Young's modulus of meterial of the bar.

The increase in energy of a metal bar of length L and cross-sectional area A when compressed with a load M along its length is (where, Y= Young's modulus of the material of metal bar)

A rectangular bar 2 cm in breadth, 1cm in depth and 100 cm in length is supported at its ends and a load of 2kg is applied at its middle. If young's modulus of the material of the bar is 20 xx 10^(11) cyn cm^(-2) , the depression in the bar is

A wire of length L and area of cross-section A, is stretched by a load. The elongation produced in the wire is I. If Y is the Young's modulus of the material of the wire, then the torce corstant of the wire is

A load of 3kg produces an extension of 1.5 mm in a wire of length 3m and diameter 2mm . Young's modulus of the material of the wire is

The sag delta of a centrally loaded rectangular beam supported at its ends depends on the applied load, the material of the beam and its dimensions (length l, breadth band height h ). If Y is Young's modulus of the material of the beam, which of the following is INCORRECT?

Two wires of diameter 0.25 cm , one made of steel and other made of brass, are loaded as shown in the figure. The unloaded length of the steel wire is 1.5 m and that of brass is 1.0 m . Young's modulus of steel is 2.0 xx 10^(11) Pa and that of brass is 1.0 xx 10^(11) Pa. Compute the ratio of elongations of steel and brass wires. (/_\l_("steel"))/(/_\l_("brass"))=?

A uniform rod of length (L) and area of cross-section (A) is subjected to tensil load (F). If sigma be the Poisson's ratio and Y be the Young's modulus of the material of the rod, then find the volumetric strain produced in the rod.