A sinusoidal voltage of Peak value 200 v...

A sinusoidal voltage of Peak value 200 volt is connected to a diode and resistor R in the circuit shown so that half wave rectification occurs . If the forward resistance of the diode is negligible compared to R the rms (in volt) across R is approximately

200

100

`200/sqrt2`

280

Text Solution

Verified by Experts

The correct Answer is:

`V_(rms) = V_0/2 = 200/2=100 V`.

Topper's Solved these Questions

SOLIDS & SEMICONDUCTOR DEVICES
MODERN PUBLICATION|Exercise Multiple Choice Questions - LEVEL -III (Questions From AIEEE/JEE Examination)|9 Videos
SOLIDS & SEMICONDUCTOR DEVICES
MODERN PUBLICATION|Exercise Recent Competitive Questions|26 Videos
SOLIDS & SEMICONDUCTOR DEVICES
MODERN PUBLICATION|Exercise Multiple Choice Questions - LEVEL -I (PARAGRAPH)|6 Videos
ROTATIONAL MOTION
MODERN PUBLICATION|Exercise RCQ|8 Videos
TRANSFERENCE OF HEAT
MODERN PUBLICATION|Exercise Recent Competitive Questions|4 Videos

Similar Questions

Explore conceptually related problems

In the circuit shown , what is the value of unknown resistance R, so that the total resistance of the circuit between P and Q Is also equal to R ?

13 resistors each of resistance R Omega are connected in the circuit as shown in figure . The effective resistance between A and B is

A sinusoidal voltage of peak value 285 V is applied to a series LCR circuit in which resistor of resistance 5 W, pure Inductor of Inductance 28.5 mH and capacitor of capacitance 800 mu R are connected. Find the resonant frequency.

A sinusoidal voltage of peak value 283 V and frequency 50 Hz is applied to a series LCR circuit in which R = 3Omega, L = 25.48 mH, and C = 796 muF . Find (a) the impedance of the circuit, (b) the phase difference between the voltage across the source and the current, (c) the power dissipated in the circuit, and (d) the power factor.

Five identical resistor each of resistance R = 1500 Omega are connected to a 300 V battery as shown in the circuit. The reading of the ideal ammeter A is

MODERN PUBLICATION-SOLIDS & SEMICONDUCTOR DEVICES-Multiple Choice Questions - LEVEL -II

The diode used in the circuit shown in figure has a constant voltage d...
Text Solution
|
In the following common emitter configuration an NPN transistor with c...
Text Solution
|
A sinusoidal voltage of Peak value 200 volt is connected to a diode an...
Text Solution
|
The junction diode in the following circuit requires a minimum current...
Text Solution
|
In the circuit given below , V(t) is the sinusoidal voltage source , v...
Text Solution
|
Select outputs Y of the combination of gates shown below for inputs A ...
Text Solution
|
In the following circuits PN - junction diodes D1,D2 and D3 are ideal ...
Text Solution
|
Find V(AB)
Text Solution
|
A diode is connected to 200 V (rms) ac in series with a capacitor as s...
Text Solution
|
A potential difference of 2V is applied between the opposite faces of ...
Text Solution
|
The contribution in the total current flowing through a semiconductor ...
Text Solution
|
Ge and Si diode conduct at 0.3 V and 0.7respectively . In the followi...
Text Solution
|
In the circuit shown in figure the maximum output voltage
Text Solution
|
In the following circuit find I1 and I2
Text Solution
|
The following configuration of gate is equivalent to :
Text Solution
|
Figure gives a system of logic gates . From the study of truth table i...
Text Solution
|
The combination of gates shown below produces
Text Solution
|
The figure shows NAND gates followed by a NOR gate . The system is equ...
Text Solution
|
The diagram of a logic circuit is given below . The output F of the ci...
Text Solution
|
The voltage gain of the following amplifier is
Text Solution
|